Windows smb printing, Wps870g user guide – Motorola WPS870G User Manual
Page 67
WPS870G
User Guide
PAGE 60
Banner
Check Enable Banner to print a banner page before each print job.
If using a PostScript Printer, click to enable for printing a banner.
The User Name will be printed on the banner page.
Windows SMB Printing
This method requires no additional software to be installed, but either the NetBEUI or
TCP/IP protocol must be installed on your computer.
If you need to change the Domain name of your WPS870G, run the Installation Wizard
again.
Use the following procedure to configure the WPS870G’s printer as a Windows SMB
network printer:
1
Double-click the Network Neighborhood or My Network Places icon on your desktop.
2
From the View menu, select Details.
3
Locate the desired Wireless Print Server, as shown in the example below:
– If it is the same Workgroup as your computer, it will be listed.
– If it is in a different workgroup, double-click Entire Network, then double-click the
appropriate Workgroup to locate it.
4
Double-click WPS870G to view a Printer icon for each printer port. The Comment field
may indicate what type of printer is connected to the port.