My eps file does not print with the correct fonts, User guide wps870g – Motorola WPS870G User Manual
Page 80
User Guide
WPS870G
PAGE 73
My EPS file does not print with the correct fonts.
This is a problem that occurs in some application programs. Try downloading the fonts
contained in the EPS file before printing the saved EPS file.
I cannot select the "Remaining from:" item in the print dialog box.
If you have selected the Layout value, "2 Up," or "4 Up," you cannot access the Remaining
from
item. Choose other selections.
A cover page prints either on the first or the last page of the document.
Select one of these solutions:
Turn the cover page feature off in your printer driver.
Insert extra page breaks in your document to avoid the cover page printing on the first
or last page of your document.
The colors on my printed output do not match the colors on my computer screen.
When the printer receives a color file, it tries to match the printed output color to the screen
color. Sometimes the printer cannot match up the colors as closely as desired. To alleviate
this problem, perform the following steps:
Choose "Calibrated Color/Grayscale" in the Print pop-up menu in the Print Options
dialog box. The printer makes adjustments to match the colors.
Check your monitor to ensure all settings (for example, brightness) are adjusted
correctly.
Use calibration software, available from other vendors.
When I send a print job, I get a PostScript Command error or no printout.
Check the communication protocols. The computer, Wireless Print Server, and printer must
all be configured to the same communication protocol
(either Binary or ASCII).
To configure your system:
1
Choose which protocol you are going to use. You should check your printer as it may
only use one certain protocol.
2
Set your printer to the desired protocol.
3
Use the computer's Print submenu to configure your computer to use the protocol you
have chosen.
4
Configure the Wireless Print Server to use the same protocol as the printer and
computer.
My printer doesn’t show up in the list of available printers during installation.
If you are using an USB-enabled print driver to connect your printer to the Wireless Print
Server, you might need to download and use an Ethernet-enabled print driver. You will also
need to use IP Printing (LPR) if you use an Ethernet print driver. See