Mocomtech CRS-300 - Manual (Page 183)

CRS-300 1:10 Redundancy Switch Revision 16
Front Panel Operation MN/CRS300.IOM
7–3
7.1.2 Front Panel LED Indicators
7.1.2.1 Unit Status LED Indicators
The behavior of the three front panel LEDs adjacent to the keypad, which
indicate operational status of the CRS-300 switch unit, are described below
in Table 7-1:
Table 7-1. Unit Status LED Indicators
LED Color Condition
UNIT STATUS
Green Normal operation (no Switch Faults)
Red Switch Fault, e.g., PSU fault or COMMS failure
STORED EVENT
Off No Stored Events
Orange Switch has Stored Events
Orange
(Flashing)
CAUTION: Switch is in Manual mode
REMOTE
Off
Switch in Local Mode – remote monitoring is possible;
remote configuration control is not allowed
Orange
Switch in Remote Mode – configuration changes are
disabled via the front panel keypad