Mocomtech CRS-300 - Manual (Page 32)

CRS-300 1:10 Redundancy Switch Revision 16
Introduction MN/CRS300.IOM
1–10
1.4.3.2 TMI Cards: CDM-570/570L, -600/600L, -625
Figure 1-6.
CRS-320 TMI EIA-
232/-422 (PL/9581-1)
OBSOLETE
REPLACED BY
CRS-340
DB-25 Female DB-25 Male
Figure 1-7.
CRS-330 TMI
G.703
(PL/9033-1)
DB-15 Male DB-25 Male RJ-45
DB-15 Female (4X) BNC - Female
Figure 1-8.
CRS-340 TMI EIA-
232/-422 or LVDS
or G.703
(PL/9387-1)
DB-15 Male DB-25 Male
(2X) BNC - Male DB-15 Female DB-25 Female
Figure 1-9.
CRS-365D TMI E1
(1-4 ports)
(PL/12985-2)
FOR USE WITH
CDM-625 ONLY
DB-9 Female DB-9 Female
DB-9 Male DB-9 Male HD-15 Female
Figure 1-10.
CRS-370 TMI
HSSI (PL/9034-1)
FOR USE WITH
CDM-600 ONLY
HD-50 Female DB-25 Male
IMPORTANT
Depending on the traffic data type, the appropriate jumper settings are provided on
the TMI to ensure proper operation for RTS/CTS, DTR/DSR (CRS-320 (obsolete) or
CRS-340 TMIs) and CA/TA (CRS-370 TMI). Refer to Chapter 4. MODEM, TMI AND
SWITCH CONFIGURATION for this important configuration information.