Moog RKP-II - Manual (Page 13)

1 General Information Warranty and Liability
© 2010 Moog GmbH User Manual RKP-II (CA53461-001; Version 2, January 2010) 5
1.5 Warranty and Liability
In principle, our general terms and conditions for delivery and payment apply.
These shall be available to the buyer at the latest at the time the sales contract
is completed.
Limits to Warranty and
Liability Among other things, warranty and liability claims are excluded for personal
injury or property damage should they be the result of one or more of the
following causes:
• Work performed with and to the radial piston pump or handling the radial
piston pump by users not qualified for the job
Ö Chap. "2.2.2 Selecting and Qualifying Staff", Page 8
• Use in violation with regulations
Ö Chap. "2.1 Intended Use", Page 7
• Unsafe operation
Ö Chap. "2.2.1 Safe Operation", Page 8
• Failing to take required work safety measures for the respective
application
Ö Chap. "2.2.4 Work Safety", Page 9
• Not adhering to the instructions in User Manual at hand or to the relevant
supplemental documentation for the respective application
• Non-observance of the relevant manufacturer's safety standards and
those of the operator of the machinery for each respective application
• Non-observance of the relevant regulations applicable nationally and
internationally, or standards and directives (such as, e. g., EU Machine
Directive and the regulations by the Employer's Liability Association, TÜV
or VDE) as amended in their current version when designing, assembling
and operating the machinery with all of the installed components.
• Failure to install a suitable safety system for limiting the pressure in the
hydraulic connections
Ö Chap. "2.3.2.1 Safety Devices for Limiting Pressure", Page 10
• Using radial piston pumps that are not in technically flawless condition or
not safe for operation
• Unauthorized or improperly performed modifications to the design or
repairs and maintenance work
Ö Chap. "2.2.3 Structural Modifications", Page 9
Ö Chap. "8 Maintenance and Repairs", Page 53
• Not adhering to the inspection and maintenance instructions from the
manufacturer and the operator of the machinery.
• Not adhering to all technical data during storage, transport, assembly,
disassembly, connecting, start-up, configuring, operating, cleaning,
repairing or resolving any possible failures, especially to the ambient
conditions as well as to the data of the hydraulic fluid in use.
Ö Chap. "4 Technical Data", Page 27
• Improper storage, transport, assembly, disassembly, connection, start-up,
configuration, operation, cleaning, repairing, resolving any possible
failures or disposal
• Use of unsuitable or defective accessories or rather unsuitable or
defective spare parts
Ö Chap. "10 Spare Parts, Accessories, Repairs", Page 57
• Catastrophic events beyond our control or acts of God