M-S Cash Drawer 7193 - Manual (Page 114)

Index 7193 Owner’s Guide
May 1996 112
Commands, printer function
add n extra dot rows, 58, 65
align character positions, 59, 71
carriage return, 58, 64
clear printer, 58, 64
enable/disable panel switch, 59, 71
feed n dot rows, 58, 65
feed n print lines, 58, 64
full knife cut, 58, 66
generate pulse to open cash drawer, 59, 72
generate tone, 58, 66
horizontal tab, 58, 63
initialize printer, 59, 68
line feed, 58, 63
partial knife cut, 58, 66
print, 58, 65
print and feed n lines, 59, 71
print and feed n minimum units, 59, 69
read from non-volatile memory, 59, 72
select printer, 59, 68
select sensors to stop printing, 59, 71
set absolute starting position, 58, 67
set character right-side spacing, 58, 67
set column, 58, 66
set horizontal tab positions, 59, 69
set line spacing to 1/6 inch, 59, 68
set line spacing to n minimum units, 59, 68
set relative starting position, 59, 70
write to non-volatile memory, 59, 72
Commands, printer status
request alternate status, 61, 85
transmit cash drawer status, 61, 84
transmit printer status, 61, 86
Commands, real time
busy line and fault conditions, 90
description, 87
implementation, 87, 88
moving data through the buffer, 89
real time printer status transmission, 62, 96
real time request to printer, DLE sequence,
62, 95
real time request to printer, GS sequence,
62, 94
real time status transmission, DLE
sequence, 62, 92
real time status transmission, GS sequence,
62, 91
rules for using, 88
Commands, sending, 45
using BASIC, 46
using DOS, 46
Communication, 45
Communication cable, 9
ordering, 6
Communication interface
Parallel, 52
RS-232C, 46
Compressed pitch
sample characters, 108
Connecting cables
cash drawer, 15
communication, 16
power, 16
Consumables, see Paper