Full knife cut, Partial knife cut, Generate tone – M-S Cash Drawer 7193 User Manual
Page 69: Set column
Commands
7193 Owner’s Guide
May 1996
66
Full Knife Cut
This command is implemented the same as Partial Knife Cut (1A/1B 6D).
Hex
Decimal
ASCII
19
1B 69
25
27 105
EM
ESC i
Partial Knife Cut
Partially cuts the receipt, leaving .20 inch (5 mm) of paper. The length of the cut
can be changed through the DIP switches. See “Setting Partial Cut Distance” in
the “Diagnostics” chapter. The cut edge is 108 dot rows or .71 inch (18 mm)
above the print station. It is valid only at the beginning of a line.
Hex
Decimal
ASCII
1A
1B 6D
26
27 109
SUB
ESC m
Generate Tone
Generates an audible tone.
Hex
Decimal
ASCII
1B 07
27 7
ESC BEL
Set Column
Prints the first character of the next print line in column n. It must be sent for
each line not printed at column one. The value of n is set to one after each line. It
cannot be used with Single- or Double-Density graphics.
Hex
Decimal
ASCII
Value of n
1B 14 n
27 20 n
ESC DC4 n
1-44 (Standard Pitch)
1-56 (Compressed pitch)