M-S Cash Drawer 7193 - Manual (Page 95)

Commands 7193 Owner’s Guide
May 1996 92
Hex Decimal ASCII Value of n
10 04 n 16 4 n DLE EOT n 1 = Transmit printer status
2 = Transmit RS-232C busy status
3 = Transmit error status
4 = Transmit receipt paper status
5 = Transmit slip paper status
The command is ignored if n is out of range.
Note: An application using the DLE sequence must send EOT within 100
milliseconds of DLE or the printer will misinterpret the DLE and execute a
Clear Printer command. Avoid this possibility by using the GS EOT n
sequence which is handled exactly the same as DLE EOT n.
1 = Transmit Printer Status
Bit Status Hex Decimal Function
0 Off 00 0 Fixed to Off
1 On 02 2 Fixed to On
2 Off
On 00
04 0
4 One or both cash drawers open
Both cash drawers closed
3 Off
On 00
08 0
8 Not busy at the RS-232C interface
Printer is Busy at the RS-232C interface
4 On 10 16 Fixed to On
5 Undefined
6 Undefined
7 Off 00 0 Fixed to On