Set horizontal tab positions, Print and feed n minimum units – M-S Cash Drawer 7193 User Manual
Page 72
7193 Owner’s Guide
Commands
May 1996
Set Horizontal Tab Positions
Sets up to 32 horizontal tab positions in ascending order n columns from column
one, but does not move the print position. See the Horizontal Tab (09) command.
The command ends with Hex 00; Hex 1B 44 00 clears all tabs. The tabs cannot be
set higher than the column width of the current pitch: standard pitch = 44
columns; compressed pitch = 56 columns.
Hex
Decimal
ASCII
Value of n
Default
1B 44 n1 ...
n32 00
27 68 n1 ...
n32 00
ESC D n1 ...
n32 00
Column for Tab
Minus 1
Every 8 chars. from
col. 1 (9, 17, 25, etc.)
Print and Feed n Minimum Units
Prints one line from the buffer and feeds the paper n/360 inch. The line height
equals the character height when n is too small.
Hex
Decimal
ASCII
Value of n
1B 4A n
27 74 n
ESC J n
0-255