M-S Cash Drawer 7193 - Manual (Page 44)

7193 Owner’s Guide Diagnostics
May 1996
Ignoring/Using the Carriage Return
This function allows the printer to ignore or use the Carriage Return (Hex 0D)
command depending on the application. Some applications expect the command
to be ignored while others use the command as a print command.
Caution: The DIP switches are set at the factory to predetermined settings and
should generally not be changed. If you must change the settings, do so carefully
to avoid changing other functions.
1. Turn the power off.
2. Turn the printer over and note what the current DIP switch settings are.
3. Set the switches to the settings in the table that match you want for ignoring
or using the Carriage Return command.
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Option
On Off On On Off On Ignore CR (Hex 0D)
On Off On On Off Off Use CR (Hex 0D) as
Print Command
(Default)*
*Emulates the NCR 7150™ printer.
4. Turn the power back on to enter the settings into the EEROM.
The On Line light (green) blinks.
5. Turn the power off.
6. Set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the on-line mode.