M-S Cash Drawer 7193 - Manual (Page 77)

Commands 7193 Owner’s Guide
May 1996 74
Select Pitch (Column Width)
Selects the character pitch for a print line. It is valid only at the beginning of a
line. Standard and compressed pitches cannot be used together on the same line.
See “Appendix B” for a description of both pitches.
Hex Decimal ASCII Value of n Default
1B 16 n 27 22 n ESC SYN n 0 = Standard Pitch
1 = Compressed Pitch 0
Set Print Mode
Selects the print mode: standard, compressed, double high, or double wide. See
“Appendix B” for a description of standard and compressed character pitches.
Hex Decimal ASCII Value of m Default
1B 21 m 27 33 m ESC ! m See Next Table 0
Value of m
Bit
Function 0 1
Bit 01
Pitch
Standard Pitch2
44 Col/Line, 15 CPI (Rec)
66 Col/Line, 13.9 CPI (Slip)
Compressed Pitch
56 Col/Line, 19 CPI (Rec)
80 Col/Line, 17.1 CPI (Slip)
Bit 4 Double
High3
Canceled Set
Bit 5 Double
Wide Canceled Set
1Bit 0 is ignored unless it is at begining of line. Bits 1, 2, 3, 6, 7 are not used.
2Standard and compressed pitch cannot be used together in the same line.
3Cannot be used together with normal height in same line.