M-S Cash Drawer 7193 - Manual (Page 85)

Commands 7193 Owner’s Guide
May 1996 82
Define Downloaded Bit Image
Enters a downloaded bit image (such as a logo) into RAM with the number of
dots specified by n1 and n2. It is available until power is turned off, another bit
image is defined, or either Initialize Printer (1B 40), or Define User-Defined
Character Set (1B 26)
, command is received.
A downloaded bit image and user-defined characters cannot be defined at the
same time. Any user-defined characters will be cleared from RAM when this
command is used. See the illustration on the next page for a representation of the
bit image.
Hex Decimal ASCII
1D 2A n1 n2 d1 ... dn 29 42 n1 n2 d1 ... dn GS * n1 n2 d1 ... dn
Value of n1 Value of n2 Value of d
1-56 (8 x n1 = Number of
Horizontal Dot Columns) 1-48 (Number of
Vertical Bytes)1
Bytes of Data (Printed
Down, Then Across)
1The number of bytes sent is represented by the following formula:
n = 8 x n1 x n2 (n1 x n2 must be less than or equal to 1344).