M-S Cash Drawer 7193 - Manual (Page 55)

7193 Owner’s Guide Communication
May 1996
DIP Switch Settings for RS-232C Parameters
Switch Settings Description
1 OFF
ON RS-232C Communication: On-line Mode (Default)
Level 1 Diagnostics: Setup Mode
2 OFF
ON DTR/DSR Protocol (Default)
XON/XOFF Protocol
3 OFF
ON Parity Disabled (Default)
Parity Enabled
4 OFF
ON Odd Parity
Even Parity
5, 6 5
OFF
ON
OFF
ON 6
OFF
OFF
ON
ON
19,200 Baud
9600 Baud (Default)
4800 Baud
1200 Baud
Note: The following options are set with the printer in the setup mode. See
“Level 1 Diagnostics” in the “Diagnostics” chapter for more information.
DIP Switch Settings for Data Error and Data Buffer Options (Choose one from each option)
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Option
On Off On Off Off Off “?” for Data Errors*
On Off On Off Off On Ignore Data Errors
On Off On Off On Off 4K Byte Data Buffer*
On Off On Off On On One Line Data Buffer
*Default