M-S Cash Drawer 7193 - Manual (Page 46)

7193 Owner’s Guide Diagnostics
May 1996
1BH
61H 00H 1BH 64H 06H 1BH 6DH 16 H0CH 1BH 21H
30H 20H 37H 31H 35H 36H 20H 54H 68H 65H 72H
6DH 61H 6CH 2FH 49H 6DH 70H 61H 63H 74H 0AH
1BH 21H 20H 54H 54H 77H 6FH 20H 48H 65H 61H
Datascope Mode Print Test
Exit the Data Scope Mode
1. Turn the power off.
2. Set the switches to the settings in the table.
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6
On Off Off On Off Off
3. Turn the power back on to enter the settings into the EEROM and disable the
Data Scope Mode.
The On Line light (green) blinks.
4. Turn the power off.
5. Set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the on-line mode.
6. Turn the power back on.
The printer is on-line and can communicate normally with the host system.