M-S Cash Drawer 7193 - Manual (Page 99)

Commands 7193 Owner’s Guide
May 1996 96
Real Time Printer Status Transmission
Transmits one byte status of the printer in real time.
Hex Decimal ASCII
1D 05 29 5 GS ENQ
Bit Status Hex Decimal Function
0 Off
On 00
01 0
1 Receipt paper adequate
Receipt paper low
1 Off
On 00
02 0
2 Receipt paper adequate
Receipt paper low
2 Off
On 00
04 0
4 Both receipt and cassette doors closed
Receipt or cassette door open
3 Off
On 00
08 0
8 Not busy at the RS-232C interface
Printer is busy at the RS-232C interface
4 Off
On 00
10 0
16 One or both cash drawers open
Both cash drawers closed
5 Off
On 00
20 0
32 Paper present at both slip sensors
Paper not present at one or both slip sensors
6 Off
On 00
40 0
64 No error condition
Error condition exists in the printer
7 On 80 128 Fixed to On
7193 Clear Printer Command
Resets certain parameters and clears the print buffer as originally defined. This is
NOT a Real Time command. It only distinguishes the Clear Printer command
from other DLE sequences.
Hex Decimal ASCII
10 00 16 0 DLE NUL