Figure 5-8. telephone connection, Data/command connector rs232 cable – Multi-Tech Systems DataTalker DT101/xx User Manual

Page 58

Advertising
background image

58

DataTalker Owner’s Manual

External Modem, DSU, or ISDN Terminal Adapter

3

If the external device has an RS232 interface, connect the composite link cable supplied with
the DataTalker from the EXTERNAL COMPOSITE RS232C/V.35 connector on the back
panel to the external device.

MODEM

DSU/TA

DIAL-UP

LEASED

DIGITAL

VOICE/FAX CHANNEL 1

FXO

FXS

EXTERNAL COMPOSITE

DATA/COMMAND

RS232C/V.35

E&M

INTERNAL COMPOSITE

POWER

GND

To External
Device

Composite
Link Cable

Figure 5-6. External Modem, DSU, or Terminal Adapter Connection

If the external device has a V.35 interface, connect a V.35 interface adapter cable (a cable
with a 34-pin Winchester male connector on one end and a DB-25S connector on the other
end) from the EXTERNAL COMPOSITE RS232C/V.35 connector to the external device. You
can order a V.35 interface adapter cable from Multi-Tech (part number 90056210).

If the external device has a V.35 interface, you must move the V.35 shunt from its default
RS232 position to the V.35 position. See Table 5-2 for the procedure on how to move the
shunt.

Data Channel

4

If you are connecting the data channel to an asynchronous device, such as a PC or other
type of host, connect an RS232C cable from the DATA/COMMAND connector on the
DataTalker to the serial port of the async device.

MODEM

DSU/TA

DIAL-UP

LEASED

DIGITAL

VOICE/FAX CHANNEL 1

FXO

FXS

EXTERNAL COMPOSITE

DATA/COMMAND

RS232C/V.35

E&M

INTERNAL COMPOSITE

POWER

GND

DATA/COMMAND
Connector

RS232 Cable

Figure 5-7. Data Channel Connection

If you are connecting the data channel to a sync device, connect a cable appropriate for a
synchronous interface from the DATA/COMMAND connector on the DataTalker to the
appropriate connector on the sync device.

Voice/Fax Channel

5

If you are connecting the voice/fax channel to a station device (a normal telephone, a KTS
telephone, or a fax machine), connect an RJ-11 phone cable from the VOICE/FAX
CHANNEL FXS connector on the DataTalker to the station instrument.

MODEM

DSU/TA

DIAL-UP

LEASED

DIGITAL

VOICE/FAX CHANNEL 1

FXO

FXS

EXTERNAL COMPOSITE

DATA/COMMAND

RS232C/V.35

E&M

INTERNAL COMPOSITE

POWER

GND

VOICE/FAX CHANNEL 2

RJ-11
Telephone
Cable

VOICE/FAX

CHANNEL 1

FXS Connector

8

9

7

4

5

6

3

2

1

#

0

*

Figure 5-8. Telephone Connection

Advertising
This manual is related to the following products: