Multi-Tech Systems DataTalker DT101/xx - Manual (Page 9)

9
Chapter 1 - Introduction and Description
Chapter 4 - Unpacking and Configuration
This chapter describes the contents of the shipping container; provides a customizeable
configuration summary; discusses configuration considerations for the data port, voice/fax
channel, and the composite link; and provides a detailed configuration procedure. The
configuration procedure simplifies the process by asking questions about your application, which
allows you to glide through the configuration process by configuring only the items that need to
be changed.
Chapter 5 - Installation
Chapter 5 provides procedures for cabling your DataTalker, moving the V.35 shunt, applying
power, and checking it out. Cabling involves a minimum of three cables. Each cable connection is
explained in detail. If a V.35 interface is used, a procedure on how to move the shunt is provided.
Finally, a power-on and checkout procedure is provided with some suggestions on what to do in
case something goes wrong.
Chapter 6 - Menus
The DataTalker is software driven using menus, and is controlled through a command port
device. This chapter describes the menus and the impact each option has on your system’s
operation.
Chapter 7 - Troubleshooting
This chapter is a guide to troubleshooting your DataTalker. It contains lists of error conditions,
probable causes, and suggested fixes or steps designed to isolate the failing unit in your
communications network.
Chapter 8 - Service, Warranty and Tech Support
Chapter 8 provides instructions on getting service for the DataTalker at the factory; a statement
of the limited warranty; information about our user bulletin board service, and space for recording
information about your DataTalker prior to calling Multi-Tech's Technical Support.