Multi-Tech Systems DataTalker DT101/xx - Manual (Page 20)

20
DataTalker Owner’s Manual
2.1 Introduction
The Multi-Tech DataTalker is available in both desktop (DT10x) and rack-mount (DT10xR)
versions. The desktop version is designed for home office applications. It is mounted in a
horizontal cabinet and has an external power supply, a power switch, an originate switch, and a
switch that allows you to use it also as a stand-alone modem or terminal adapter. The rack-mount
version is designed for main office applications. It is mounted for vertical insertion into a Multi-
Tech RackTalker rack, has an internal power supply, is hot-swappable, and has a reset switch.
Otherwise, they are identical. DataTalkers are available with a synchronous or asynchronous
data channel, one or two voice/fax channels, and an optional internal composite link V.34
modem, 56K bps DSU, or 2B+D link ISDN terminal adapter.
DataTalker Configurations
Desktop Models:
Base Model with...
1 Data Channel & 1
Voice/Fax Channel
1 Data Channel & 2
Voice/Fax Channels
No Additional Options
Installed
DT101 DT102
33.6K bps Modem DT101/V34 DT102/V34
56K bps DSU DT101/56 DT102/56
2B+D ISDN Terminal
Adapter
DT101/IS DT102/IS
Rack-Mount Models:
Base Model with...
1 Data Channel & 1
Voice/Fax Channel
1 Data Channel & 2
Voice/Fax Channels
No Additional Options
Installed
DT101R DT102R
33.6K bps Modem DT101R/V34 DT102R/V34
56K bps DSU DT101R/56 DT102R/56
2B+D ISDN Terminal
Adapter
DT101R/IS DT102R/IS
Valid Voice/Fax Configurations:
Configuration Description
E&M to E&M Any phone or fax machine connected to the PBX at one site can call
any phone or fax machine connected to the PBX at the other end.
FXS to FXS No number must be dialed. If the phone or fax machine on one end
goes off hook, the phone or fax machine on the other end rings.
FXS to FXO The phone and fax machine at the FXS site act as though they are
extensions of the PBX at the FXO site.