Multi-Tech Systems DataTalker DT101/xx - Manual (Page 81)

81
Chapter 6 - Menus
6.6 Configure Remote Unit
Configuration menu option 5 is dependent on the position of DIP switch SW-5. If DIP switch SW-
5 is in the Open (Up) position (MMV8/16/32), the configuration menu allows for the DataTalker to
set parameters to communicate with with other MultiMux products (i.e., MMV800, MMV1600, or
MMV3200 series). If the DIP switch is in the Down (Closed) position (Configure Remote Unit),
the local unit can display and change the configuration of the remote unit. The default for this
DIP switch is the Open (Up) position.
When the position of DIP switch SW-5 is in the Down (Default) position, the Configuation menu
appears as follows:
Configurations
1 - Data Port Configuration
2 - Voice/Fax Channel(s) Configuration
3 - Composite Link Configuration
4 - Factory Default Configuration Options
5 - Configure Remote Unit
S - Store All Configurations
M - Main Menu
P - Previous Menu
Selection : _
When the composite link is established with the remote unit, option 5 is selected, and async
mode is enabled, the remote unit’s Main menu appears on the local unit’s monitor. All menus that
appear are from the remote unit. Any changes made affect the remote unit.
6.6.1 MMV8/16/32 Configuration Options
When DIP switch SW-5 is in the Open (up) position, the Configuration menu appears as follows:
Configurations
1 - Data Port Configuration
2 - Voice/Fax Channel(s) Configuration
3 - Composite Link Configuration
4 - Factory Default Configuration Options
5 - Configure Remote Unit
S - Store All Configurations
M - Main Menu
P - Previous Menu
Selection : _
If option 5 is selected, the MMV8/16/32 menu is displayed and the source and destination nodes
and the source and destination channels can be selected.
MMV8/16/32 Configurations Options
1 - Unit Source Node :00
2 - Data Destination Node :01
3 - Data Source Channel :01
4 - Data Destination Channel :01
5 - Voice/Fax Ch. 1 Dest. Node :01
6 - Voice/Fax Ch. 2 Dest. Node :01
S - Store All Configurations
M - Main Menu
P - Previous Menu
Selection : _