MITSUBISHI ELECTRIC HS-HD2000U - Manual (Page 57)

55
Advanced Features
Advanced Playback Controls
(for analog playback only)
Special Effects
You can use the shuttle ring and the jog dial on the front panel, or the shuttle ring
and the adjust dial on the remote to control the playback speed of the tape.
Change the playback speed while tape is paused
1 While the VCR is playing a tape, press PAUSE to freeze the picture.
2 Turn the shuttle ring and hold it to play the tape at a particular speed (see
diagram). If you release the ring, it will come back to the center position, and
the still (PAUSE) mode will resume.
3 To resume normal playback, press PLAY.
After about 5 minutes in the still or slow-motion mode, the VCR will automatically
stop to avoid damage to the tape. The picture may vibrate vertically when you
pause the VCR’s picture.
Change the playback speed while tape is playing
You can also change the playback speed with the shuttle ring without entering the
PAUSE mode. To do this, turn the shuttle ring and hold it to play the tape at a
particular speed (see the diagram). If you release the ring, it will come back to the
center position, and normal playback will resume.
Advance tape frame by frame
1 While the VCR is playing a tape, press PAUSE to freeze the picture.
2 Turn the jog or the ADJUST dial clockwise to advance the tape forward. Turn it
counter-clockwise to reverse the tape. The faster you turn the dial, the faster
the tape will move.
3 To resume normal playback, press PLAY.
shuttle ring
shuttle ring
jog dial
adjust dial
1 Reverse high speed search
2 Reverse speed search
3 Reverse fast playback
4 Reverse playback
5 Reverse slow-motion playback
6 Still
7 Slow-motion playback
8 Playback
9 Fast playback
10 Forward speed search
11 Forward high speed search
5 7
6
4
3
2
1
8
9
10
11
6
5
4
3
2
1 7
1 Reverse high speed search
2 Reverse speed search
3 Reverse fast playback
4 Playback
5 Fast playback
6 Forward speed search
7 Forward high speed search