MITSUBISHI ELECTRIC HS-HD2000U - Manual (Page 72)

70
Location of Controls
IEEE 1394
INTERFACE CONVERTER
BOX CONTROL
ANTENNA
OUT
IN
VIDEO AUDIO R L/MONO S-VIDEO
TIMER RESET
VIDEO S-VIDEO
IN 1
OUT 1
OUT 2
AUDIO R L
Rear Panel Jacks
VIDEO INput and OUTput jacks
Yellow jacks are for receiving (IN) and sending (OUT)
video signals to a monitor TV or from another VCR.
The black jacks marked with “S-Video” can be used to
connect televisions with S-Video jacks. (“S-Video jack”
refers to a Separated Luminance-Chrominance (Y/C)
jacks that conforms to the NTSC signal.)
AUDIO INput and OUTput jacks
Red and white jacks are for receiving (IN) and sending
(OUT) audio signals. Red signifies the right channel, and
white signifies the left channel. Stereo audio cables are
also color coded red and white. If you are receiving or
sending a mono (non-stereo) signal, you should use only
the left (white) terminal.
CONVERTER BOX CONTROL jack
Connects IR Emitter to a cable box and/or satellite
receiver.
TIMER RESET
Erases all programmed recording settings and resets the
clock. Use this button with care.
ANTENNA IN jack
Attach an external antenna or cable to bring in an outside
signal.
ANTENNA OUT jack
Attach a coaxial cable to your TV to send out antenna/
cable signals from the VCR to your TV.
IEEE 1394 INTERFACE
Connects an IEEE 1394 cable to an integrated HDTV or
an IEEE 1394-equipped HDTV receiver for D-VHS
recording/playback.