MITSUBISHI ELECTRIC HS-HD2000U - Manual (Page 70)

68
remote control sensor
Receives signals from the remote control.
Do not block it.
JOG/CHANNEL
Changes channels when tape is stopped.
Adjusts tracking and picture vibration.
shuttle ring
Fast forwards a tape or fast forward searches by turning
right. Rewinds a tape or reverse searches by turning left.
DNR&TBC (Digital Noise Reduction & Time Base
Correction)
Turns the DNR + TBC on or off when playing a tape.
Turns the 3D-Y/C on or off when the tape is stopped.
PLAY
Plays a tape.
Resumes normal playback from special effects.
STOP
Stops a tape.
PAUSE/% % % % %START TIME
Pauses a tape when recording.
Freezes a frame when playing a tape.
Sets the start time in OTR
2 recording.
REC/˙ ˙ ˙ ˙ ˙REC LENGTH
Records to the end of the tape by pressing once.
Sets the recording time for OTR recording by pressing
repeatedly.
POWER D-VHS EJECT
FF REW
JOG/CHANNEL SHUTTLE
STOP PLAY REC PAUSE
DNR&TBC
VIDEO IN 2 L/MONO-AUDIO IN 2 -R
S VIDEO IN 2
SP/EP
REC LENGTH START TIME
OTR2
cassette slot
front panel display
remote control
sensor
video input 2 jack
S-video input 2 jack
audio input 2 jacks
Location of Controls
Front Panel
POWER
Turns the VCR on or off.
If you have programmed your VCR to record, turn off your
VCR.
EJECT
Ejects a tape.
D-VHS
Press to choose between recording in digital broadcast in
D-VHS format or in analog (S-VHS/S-VHS ET/VHS)
format. This button lights up during D-VHS recording/
playing.
SP/EP
Changes the recording speed (SP is standard play; EP is
extended play).
S-video input ˙ ˙ ˙ ˙ ˙ jack
Connect source here, such as a VCR or camcorder, to
record or dub video.
video input ˙ ˙ ˙ ˙ ˙ jack
Connect source here, such as a VCR or camcorder, to
record or dub video.
audio input ˙ ˙ ˙ ˙ ˙ jacks
Connect source here, such as a VCR or camcorder, to
record or dub audio.
cassette slot
Insert the video cassette tape here.
front panel display
See the next page.