MITSUBISHI ELECTRIC HS-HD2000U - Manual (Page 68)

66
Location of Controls
Remote Control
remote control LCD
See the section “Remote Control LCD”.
VCR POWER
Turns the VCR on or off. If you have programmed the
VCR to record, you need to turn the VCR off.
QUICK PROGRAM
Goes to VCR Plus+ system menu.
Exits the programming screen.
LCD PROGRAM
Programs the VCR to record using the remote control LCD.
VCR Plus+
Sets VCR Plus+ system programming using the remote
control LCD.
TRANSFER
Press when you transfer the PlusCode number or the
contents of the programmed recording displayed on the
remote control LCD to the VCR.
Number buttons
Selects TV stations, enters PlusCode numbers.
Sets quick search (CM skip) time.
CANCEL
Cancels selections on the on-screen menus.
Resets the counter display to “0H00M00S”.
ENTER
Enters selections on the on-screen menus.
TV POWER
Turns the TV on or off. You need to program your remote
to operate your particular brand of television.
IEEE 1394 INPUT
Selects an integrated HDTV, an IEEE 1394-equipped
HDTV receiver or a D-VHS VCR connected to the VCR.
CHANNEL Up and Down
Selects next higher or lower channel in the VCR’s or TV’s
channel memory.
VOLUME Up and Down
Raises and lowers the sound of the TV.
(Operates the TV only)
INPUT
DAILY/WEEKLY
Selects between the antenna and any other video equip-
ment that may be connected.
Press to record the program every day or the same day
every week when program the timer recording using the
remote control LCD.
VCR/TV slide switch
Operates the VCR when set to the VCR position, the TV
when set to the TV position. You need to program your
remote to operate your particular brand of television.
1 LCD PROGRAM
1 2 3
5 4 6
8 9
0
7
TV POWER
CHANNEL VOLUME INPUT
LEFT RIGHT
IEEE 1394
INPUT
VCR
PLAY
STOP
FF REW
REC
PAUSE
CM SKIP
CANCEL ENTER
TV
INDEX
2 1 3
5 4 6
8 7 9
0
DAILY/
WEEKLY
2
3 TRANSFER 3
VCR POWER QUICK PROGRAM
ENTER 2
1 VCR Plus+
2 ADJUST
remote control
LCD
shuttle ring
adjust dial
REW
Rewinds a tape or reverse searches.
PLAY
Plays a tape.
STOP
Stops a tape.
FF
Fast forwards a tape or fast forward searches.
REC
Starts recording. While recording, adds manual index
mark.
INDEX I \ \ \ \ \ , ^ ^ ^ ^ ^ I
Begins index search forward and backward.
Controls the playback speed of a tape.
PAUSE
Pauses a tape when recording.
Freezes a frame when playing a tape.
adjust dial
Selects and adjusts menu selections.
shuttle ring
Adjusts playback speed when a tape is playing.
Enters or cancels selections when using the menus.