MITSUBISHI ELECTRIC HS-HD2000U - Manual (Page 71)

69
Location of Controls
PerfecTape ® light : PT
Flashes when PerfecTape test is in progress.
Stays lit when test is complete.
D-VHS indicator :
Lights up when D-VHS playing/recording.
play and record lights : PLAY REC
These light up when the VCR is playing a tape or record-
ing. The cassette status symbol (
) will light up when
a tape is in the VCR. The dashes in the center of the
symbol simulate the movement of the tape when playing
and recording.
programmed recording light :
PROG REC
Lights up when VCR is off and it is programmed to
record.
POWER light : PWR.
Is lit when power is ON.
S-VHS indicator :
Lights up when the S-VHS tape or no tape is loaded and
the S-VHS record is set to AUTO, when you play or
record in Super-VHS (S-VHS).
S-ET indicator : S-ET
Lights up when the VHS tape is loaded and the S-ET
record is set to ON, and when you play or record in S-ET
mode.
tape speed lights : SP, EP, HS, STD
Indicates tape speed.
time counter/current time/remaining time display
This area displays:
• current time
• time counter showing how long tape has run
• time remaining on the tape
AM S-ET
PWR.
PM
SAP SP HS STD ST
D CH OTR2
LOCK
EP
VCR PT
PLAYREC
PROG REC H M S
L R
digital tracking
time counter/current time/remaining time display
play light record light
channel display
Front Panel Display
OTR light : OTR
Lights up during recording the program with One-Touch
Recording.
OTR2 light : OTR 2
Lights up during setting up, the delay time of Standby
One-Touch Recording.
lock light : LOCK
Lights up when Child Lock feature is in use.
LR indicator :
L R
L indicates that you are listening to the left channel of a
stereo track, R indicates that you are listening to the right
channel of a stereo track.
stereo indicator : ST
Indicates a stereo TV channel.
cable tuning light :
Lights up when VCR is set to receive cable broadcasts.
PRIMESTAR ® light :
Lights up when VCR has selected channels from a
PRIMESTAR receiver.
SAP indicator : SAP
Indicates that channel has a Separate Audio Program, or
SAP.
digital tracking light : D
Flashes when VCR is adjusting the tracking.
Glows steadily when tracking is finished.
If tracking is adjusted manually, it turns off.
VCR light : VCR
Indicates that the picture is controlled by the VCR.
channel display
Displays cable channel, broadcast channel, satellite
channel, or input.