Integra DSR-7.3 - Manual (Page 38)

38
Playing the Connected Source
This section shows you how to play the
sources connected to the DVD Receiver.
You may need to see “Connecting to a TV”
on pages 16 and “Connecting to Audio/Video
Equipment” on page 19 while following the
steps in this section.
About digital sound
If the equipment is digitally connected to the DVD Receiver,
the sound from the digital input will automatically be selected
and reproduced instead of the analog sound as explained
below.
• When the TV source is selected, the digital sound from the
DIGITAL OPTICAL INPUT jack is reproduced.
When the digital sound is reproduced, the DIGITAL indicator
lights up in the display. According to the received sound
system, the
ŸDIGITAL or DTS indicator lights up.
Note
The DVD Receiver only reproduces DOLBY DIGITAL, DTS, and
PCM sound formats from connected equipment.
Various Functions While Playing the
Connected Source
To use the following functions, see page 40.
• Adjusting the Volume
• Muting the Sound
• Listening Through Headphones
• Controlling the Brightness of the display on the DVD Receiver
Enjoying the Sound Effects While
Playing the Connected Source
See page 46.
Press Input Selector 2/3 on the
remote controller or Input 2/3 on
the unit to select one of the
following input sources:
• TV
• TAPE/MD/CDR
The selected input source appears in the
multipurpose display. Also the input
source indicator is lit in the display until
the DVD Receiver is switched to another
input source.
e.g. When TAPE is selected.
Start playing the selected source.
Changing the “TAPE” display to match the
connected source
1 Press the Input 2/3 button on the unit to select TAPE.
2 Press the Preset Memory button. “NAME SEL” is displayed then
“TAPE” flashes in the display.
3 Press the Input 2/3 button repeatedly to select the desired
operation.
The display changes as follows:
TAPE
→MD→CDR→TAPE
4 Press the Preset Memory button to select. “COMPLETE” appears
then the display switches back to the selected input.
1
2
Remote
controller
ŸDIGITAL DTS
Input 2/3
Preset Memory
Send
On Standby
Op en/ Clos e
2
T- D Setup IPM
SW Mode Distance
T-D/ ST
A- B
Surround A.Control
-- / ---
Mode
Enter
Repeat
Muting
Up/ Down
SP Setup Test Tone CH Sel
RC- 507M
Audio
Last M Program Random
Late Night Timer
Angle
Clear
Subtitle FM Mode
Input Selector
ENTER
Light
TV
Display
VOL C H
T V In pu t Setu p
DV D Recvr Tape
Tun
Step/ Slow
To p M enu Men u
Retu rn
Clo ck Sle ep
Dimm er
1 2 3
4 5 6
+10 Search 0
7 8 9
Input Selector 2/3
Unit
Input Selector