Integra DSR-7.3 - Manual (Page 76)

76
Customizing the Function Settings
This DVD receiver lets you set the Parental Lock if the DVD
has a parental lock level recorded on it. With Parental Lock
capable discs, you can block access to material you feel is
inappropriate for your children. Refer to the DVD jacket and
the accompanying documentation to see if a particular disc
contains a parental lock level.
Make changes to the [Parental Lock] setting in the Setup
screen General menu. Please note that changes to the
Parental Lock level cannot be made when a disc is playing.
Stop playback of the disc before attempting to make any
changes.
You cannot select [Level] or [Country Code] until you have
registered a password. Select [Password] to register a new
password. See “Entering the password” on this page for how
to register a new password.
General V2 Language Video1
Exit
+/–
Move Return
Parental Lock: Register Code Number
Enter 4—Digit Code
ENTER
RETURN
General V2 Language Video1
Exit
Parental Lock: Register Code Number
Enter 4—Digit Code
+/–
Move Return
SETUP
RETURN
ENTER 1 0 1 9
—
—
General V2 Language Video1
Exit Move
Setup Menu Mode
Setup Navigator
Parental Lock
Basic
Password
Level
Country Code
Setup viewing restrictions
SETUP
Settings: Password
(For information, refer to “Entering the Password”
on the this page.)
Level
(For information, refer to “Setting the Parental Lock
Level” on this page.)
Country Code
(For information, refer to “Setting the Country Code”
on the following page.)
When a DVD with a set Parental Lock level is loaded
Playback cannot be started until the code number has been correctly
input by using the cursor buttons (
2/3/5/∞) or the number buttons,
and ENTER has been pressed.
2 Use the cursor buttons ( 2/3) to move the cursor to a
different position in the password.
When all four numbers of the password have been entered, Enter
appears on the screen.
3 Press ENTER to set the password.
The password is entered.
Notes
• Be sure not to forget your password. If you should forget it, reset
the system, and enter a new password. To reset the system, see
“Resetting the DVD Receiver to System Settings” (page 77).
Please note that this procedure resets the system, and clears all
saved settings, not just the password.
• Some discs lock out violent scenes. Refer to instruction notes on
discs.
Setting the Parental Lock Level
General V2 Language Video1
Exit
Return
Move Select
Parental Lock: Level Change
Setup Parental Lock
SETUP ENTER
RETURN
1 Level 2 3 4 6 7 8 5 Off
■ Setting the Parental Lock Level
Change the Parental Lock level to a higher or lower level
according to the settings printed on the DVD disc jacket or
accompanying documentation. If you use the Condition
Memory function to save the settings for a particular disc, the
Parental Lock level is saved as well. Because it is saved in
memory, Parental Lock levels can be set for individual discs
according to their content rather than a set level for all DVDs.
1 Select [Level] in the [Parental Lock] setting and press
ENTER.
The screen changes to the password input screen. You cannot
select [Level] until you have registered a password. To enter the
password, refer to “Entering the Password” on this page.
2 Use the cursor buttons ( 2/3) to adjust the Parental Lock
Level.
The lock icons appear “unlocked” up to the selected level to
indicate that access is available.
3 Press ENTER to set the new level.
The new Parental Lock level is set and the screen returns to the
General menu screen. To go back to the General menu screen
without making any changes, press Return.
■ Changing the Password
Change your password whenever you feel it is necessary.
However, if you forget your existing password, you cannot
enter this screen to change it.
1 Select [Password Change] in the [Parental Lock] setting
and press ENTER.
The screen changes to the password input screen. To enter the
password, refer to “Entering the Password” on this page.
2 Use the cursor buttons ( 2/3/5/∞) or the number buttons to
enter the new password.
3 When the new password has been entered, press ENTER.
The new password is set and the screen returns to the General
menu screen. To go back to the General menu screen without
making any changes, press Return.
■ Entering the Password
When you select either [Level] or [Country Code], it is
necessary to register the password (4-digit code number).
You’ll be asked to confirm your existing password before
registering a new one. Use the following steps at any time you
are asked to enter or confirm your password.
1 Use the cursor buttons (
5/∞) or the number buttons to
select a number between 0 and 9.
You can also use the number buttons to enter the numbers
directly. When entering your password for the first time, or
changing it, you will be asked to reenter your password. When
using the number buttons to confirm the password, the numbers
appear as asterisks, and the cursor advances automatically to
the next position.