Integra DSR-7.3 - Manual (Page 62)

62
Memorizing a Last Memory location to
return to later
Press Last M during play.
The “LAST” indicator lights on the DVD
receiver.
Press Standby to turn the power to
standby, or stop playback with
7.
Once memorized, the memorized point will
be recalled even if the power is turned off,
or if the disc is ejected. Points on up to 5
discs can be memorized, and those points
are recalled the next time any of the discs
are played back.
• A Last Memory point can be memorized
for only one Video CD at a time as the
function is only effective until the Video
CD is removed from the player.
Continuing Playback from a
Specified Location (Last Memory)
The Last Memory function is convenient when you want
to continue viewing a disc from the point where you were
watching before. Unlike the resume function, the Last
Memory function is effective even if the DVD is removed
from the DVD receiver (Last Memory locations saved for
Video CDs are effective only if the disc remains loaded in
the DVD receiver).
Last Memory may not work reliably with some Video CDs
that feature PBC.
Resuming playback from where LAST
M was pressed
Load a disc that has a Last Memory
point memorized.
Some DVDs will start playback
automatically when loaded. In this case,
press
7 to stop playback.
Press Last M while in the stop
mode.
The disc begins playback at the
memorized point.
• Last Memory mode may not function for
some DVDs.
• You can use Last Memory for up to five
discs (after that the one used least
recently is deleted to make space for a
new one).
• Even with a disc you have memorized
with Last Memory, playback begins at
the start of the disc if you press
£.
• This function is for playback of DVDs or
Video CDs only. You cannot use it with
CDs and MP3s.
■ To clear the Last Memory location
1 Load a disc that has a Last Memory point memorized.
Some DVDs will start playback automatically when loaded. In this
case, press
7 to stop playback.
2 Press Last M while in the stop mode.
The disc begins playback at the memorized point.
3 Once the picture appears, press Last M again.
4 While “Last Memory” is displayed on the screen, press
Clear.
The “LAST” indicator disappears from the display.
1 1
DVD VCD DVD VCD
Send
On Standby
Op en/ Clos e
2
T- D Setup IPM
SW Mode Distance
T-D/ ST
A- B
Surround A.Control
-- / ---
Mode
Enter
Repeat
Muting
Up/ Down
SP Setup Test Tone CH Sel
RC- 507M
Audio
Last M Program Random
Late Night Timer
Angle
Clear
Subtitle FM Mode
Input Selector
ENTER
Light
TV
Display
VOL C H
T V In pu t Setu p
DV D Recvr Tape
Tun
Step/ Slow
To p M enu Men u
Retu rn
Clo ck Sle ep
Dimm er
1 2 3
4 5 6
+10 Search 0
7 8 9
£
7
Clear
Standby
Last M
2
2
Last M
Standby Last M