Janome Memory Craft 6500 - Manual (Page 29)

27
1.0 5.0
7.0 3.5 0.0
Adjusting the needle drop position
The needle drop position can be altered by pressing the
stitch width adjusting button.
Press the right side of the button (+ sign) to move the
needle bar to the right.
Press the left side of the button (- sign) to move the
needle bar to the left.
Adjusting the stitch length
The stitch length can be altered by pressing the stitch
length adjusting button.
The stitch length indication will change as pressing the
button.
Press the right side of the button (+ sign) to increase the
stitch length.
Press the left side of the button (- sign) to decrease the
stitch length.