Janome Memory Craft 6500 - Manual (Page 51)

49
To sew
Depress the foot control to sew the left side up to the
required length of the buttonhole.
Stop the machine and press the reverse button.
4 Required Length
5 Reverse Button
Start the machine again. The machine will automatically
tack and sew down the right side of the buttonhole.
Stop the machine when you are directly opposite the
starting point.
Press the reverse button.
6 Starting Point
Keep the foot control depressed. The machine will sew a
bartack, lock the stitches and automatically stop when the
buttonhole is completed.
To make the next buttonhole, position the fabric and step
down on the foot control.
To sew the next buttonhole at a different size, press the
memory button to memorize a new size and start
sewing from the beginning.
NOTES:
The machine will sew the buttonholes identical to the first
one.
The stitch density of the memorized buttonhole cannot be
altered.
Cut the buttonhole opening with the seam ripper. (Refer to
page 45.)
7 Seam Ripper
4
5
6
7