Janome Memory Craft 6500 - Manual (Page 69)

67
Programming a Monogram
Example: To program “R&B”
Select the Mode 4.
Select the letter “R” (pattern 28).
Press the memory button.
The letter “R” will be memorized.
Select the pattern “&” (pattern 64).
Press the turnover memory button.
The letter size will be reduced to 2/3 of the original size.
The reduced pattern “&” will be memorized.
Select the letter “B” (pattern 12).
Press the memory button.
“R&B” will be memorized.
Press the auto thread cutter button after programming a
monogram. The LED signal will turn on and the cutter mark
will appear after the monogram.
To sew
Depress the foot control to sew. The machine will sew a
monogram then stop automatically and trim the threads.