Janome Memory Craft 6500 - Manual (Page 50)

48
Automatic buttonhole
Machine Setting
Pattern:
12 (Mode 3)
Thread tension:1-5
Presser foot:
Automatic buttonhole foot R
Foot pressure: 3
Pull the button holder of the buttonhole foot all the way
out.
Insert the fabric under the foot. Press the up/down
needle button twice.
Remove the fabric to the left to draw the needle thread
through the hole of the foot.
Insert the garment under the foot, and lower the needle
at the starting point.
Then lower the automatic buttonhole foot R.
1 Button Holder
2 Needle Thread
3 Bobbin Thread
NOTES:
You do not need to pull down the buttonhole lever.
If you wish to change the buttonhole width and density
press the stitch width and length buttons.
If there is a difference in stitch density between the right
and left rows of the buttonhole, refer to page 69 for
correction.
If you wish to sew a buttonhole longer than the size
permitted by the automatic buttonhole foot R, use satin
stitch foot F or buttonhole foot B (optional item).
1
2
3