Janome Memory Craft 6500 - Manual (Page 57)

55
Blind Hem
Machine Setting
Pattern: 04 or 05 (Mode 3)
Thread tension:1-4
Presser foot: Blind hem foot G
Foot pressure: 3
Select the pattern 04 for woven fabrics or pattern 05 for
elastic fabrics.
NOTE:
The stitch width of the patterns 04 and 05 cannot be
changed, but the needle drop position will move.
How to fold the fabric
Fold the fabric to make a hem as shown.
1 Heavy Fabric
2 Fine to Medium Fabric
3 0.4 -0.7 cm (3/16”-1/4”)
4 Overcasted Edge of Fabric
5 Wrong Side of Fabric
To sew
Position the fabric so that the fold comes to the left side of
the guide on the foot.
Lower the presser foot.
Adjust the position of the needle swing with the stitch
width adjusting button so that the needle just pierces the
folded edge of the fabric when the needle comes over to
the left side.
Sew guiding the fold along the guide.
4 Guide on the Foot
5 Fold
Open the fabric with the right side up.
The stitches on the right side of the fabric is almost
invisible.
6 Right Side of the Fabric
1 2
3 3
4
5 5
4
5
6