Janome Memory Craft 6500 - Manual (Page 9)

7
1
2
3
4
5
6
7
8
9
10
11
1 2 3 4 5 6
7 8 9
10
11
Mode button:
Press this button to select the desired mode.
Letter style button:
Press this button to change the letter style of monogram.
Memory/recall button:
Press this button to register or recall programmed pattern combinations.
The previous pattern combination will be replaced by the new combination when
pressing this button after programming. The registered pattern combination will be
recalled when pressing this button on the initial screen of the selected mode.
Twin needle button:
Press this button when sewing with a twin needle.
Elongation button:
Press this button to elongate satin stitch patterns.
Bobbin winding button:
Press this button to wind the bobbin.
Stitch width adjusting button:
Press this button to alter the stitch width.
Stitch length adjusting button:
Press this button to alter the stitch length.
Editing button:
Press this button to edit the programmed patterns.
In the editing mode this button is used to shift the cursor to the left.
Help button:
Press this button to view alternative applications of certain stitches.
In the editing mode this button is used to shift the cursor to the right.
LCD contrast adjusting dial:
Turn this dial to adjust contrast of the LCD Screen.