Janome Memory Craft 6500 - Manual (Page 53)

51
Darning
Machine Setting
Pattern: 18 (Mode 3)
Thread tension:3-6
Presser foot: Automatic buttonhole foot R
Foot pressure: 3
Pull the button holder to the rear.
Place the garment under the foot.
Press the up/down needle button twice. Remove the
fabric to the left to draw both threads under the foot and
place the fabric back under the foot.
Lower the needle at the starting point then lower the foot.
1 Button Holder
2 Starting Point
Depress the foot control and the machine will sew a
darning 2 cm (3/4”) long and stop automatically.
Repeat sewing in the different direction until the darning
covers the rip or hole.
NOTE:
The maximum size of darning is 2 cm (3/4”) long and 0.7
cm (1/4”) wide.
3 Maximum Length 2 cm (3/4”)
4 Maximum Width 0.7 cm (1/4”)
1
2
3
4