Janome Memory Craft 6500 - Manual (Page 58)

56
Changing needle drop position
Press the stitch width adjusting button.
The LCD screen shows the left needle position from the
guide in millimeters.
Press on “—“ to move the needle to the right.
Press on “+” to move the needle to the left.
1 Left Needle Drop Position
2 Right Needle Drop Position
3 Guide on Foot
4 Distance between the Left Needle Position
and the Guide
To make the straight stitches in blind hem stitch
longer
Program a combination of the pattern 04 and pattern 58
or 59 in the Mode 3.
Two straight stitches will be added to the blind hem stitch
when combining with the pattern 58.
Four stitches will be added with the pattern 59.
1 Pattern 04
2 Pattern 58
NOTE:
To alter the needle drop position of the programmed
pattern combination, shift the cursor under the pattern 04
and press the stitch width adjusting button.
It is not necessary to adjust the needle drop position of
the pattern 58 or 59 as it will synchronously change.
4 Cursor
1
2
3
4
1
2
1
2
4