Janome Memory Craft 6500 - Manual (Page 63)

61
Pattern combination
Example: Programming the patterns 23 and 25.
Select the pattern 23 in the Mode 3.
Press memory button.
Select the pattern 25.
Press memory button.
NOTE:
Set the thread tension at 1-4, foot pressure at 3 and use
the satin stitch foot F when sewing the programmed pattern
combination.
Start to sew. The machine will sew the pattern combination
repeatedly.
NOTE:
If you press the auto-lock button in the middle of a
programmed pattern, the machine will stop automatically
after the current pattern is completed.
1 Auto-Lock Button
Pattern combination with auto thread cutting
Select the pattern 23 in the Mode 3.
Press the memory button.
Select the pattern 25.
Press memory button.
Press the auto thread cutter button.
Start the machine.
The machine will sew one unit each of the patterns 23 and
25 then stop automatically and trim the threads.
1