Janome Memory Craft 6500 - Manual (Page 47)

45
5 Start the machine to sew the buttonhole.
The buttonhole will be automatically sewn.
Step 1: The machine will sew the front bartack and the left
row first.
Then it goes back to the starting point with straight
stitch.
Step 2: The machine will sew the right row.
Step 3: The machine will sew the back bartack, and the
machine will stop automatically.
To sew another buttonhole, press the thread cutter button
and raise the presser foot. Move the fabric to where the
next buttonhole to be sewn, then lower the foot and start
the machine.
6 When buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
7 Remove the fabric and place a pin just below the
bartack at each end to prevent accidentally cutting
stitches. Cut the opening with the seam ripper.
Use an Eyelet puncher to open a keyhole buttonhole.
9 Seam Ripper
10 Eyelet Puncher
Step 1
Step 2 Step 3
5
6
7
9
10