JVC VR-716E - Manual (Page 103)

103
1.
Click z Caution
Uploading VR-716 Settings
Click [BROWSE] to
specify a backup data
file saved on the PC.
Enter the file name for
uploading.
Check that the
specified backup data
is listed.
• As this is a utility feature, ensure to stop
all operation at VR-716 when executing.
• Execution of utility features can only be
performed by users with Administrator
rights.
• During uploading, recording, playback and
onscreen operation at VR-716 will be dis-
abled.
• Upload will take a few minutes to complete.
• For uploading, the information related to
camera title, TIME ZONE, network, mail
notification, file sharing and access user
will not be updated.
2.
Specify the backup data file to upload from the PC
3.
Click [UPDATE] after specifying a backup data file
Next, click the “Open”
button.
Click the [UPDATE]
button.
4.
Click [EXEC]
Click the [EXEC]
button.
1
3
2
4
5
6
• If backup data previously created is saved
at VR-716, the download screen will be
displayed together.
• If backup data that is previously created
exists, this will be overwritten by the new
data.
• The following messages will be displayed
onscreen during upload:
Notes
NOW PROCESSING
SUCCEEDED
FAILED
Display for 5 seconds (blinking at approx.
1 sec interval) after upload has been
completed.
[NOW WRITING THE DATA]
[UPLOADING HAS BEEN COMPLETED]
[UPLOADING HAS FAILED]