JVC VR-716E User Manual
Page 98
98
Connecting to a PC – Useful Browser Features – (continued)
Ⅵ The notification mail received during alarm/sensor input will look as follows:
Mail Header
• The content in the [Subject] will be reflected.
• VR-716’s host name will be reflected as the Host Name. The content
registered at [Location Name] is also reflected in [ ].
• Lists data of alarm/sensor that are triggered within the specified
minimum notification interval. The list contains 3 types of information
as shown below:
• Alarm/Sensor Activation Time
• Recording Mode
A: Alarm recording
S: Sensor recording
• Camera Channel [Camera Title]
Message (Normal List Format)
• Only the language of the mail message changes in
accordance with the “LANGUAGE SELECTION” in the
main menu. (
☞ page 25)
Note
From: [email protected]
Subject: Starting Alarm/Sensor REC!!
• ALARM/SENSOR NOTIFICATION
Host name:
VR-716 [3rd factory]
The following alarm/sensor recording has been started:
-----------------------
01/08/2003(FRI) 20:15:15 A 3ch [INF.], 4ch [ENTRANCE]
01/08/2003(FRI) 20:15:17 S 9ch [ ]
01/08/2003(FRI) 20:18:15 A 13ch [N. GATE], 14ch [ ], 16ch [ ]
-----------------------
The End
RECORD NOTIF.
----------------
HOST. vr716
[3rd factory]
----------------
LIST DISPLAY
14/10/2003
----------------
clock: 19:39:18
Mode: A
CamCh: 3[INF.], 4[ENTRANCE]
----------------
clock: 19:39:39
Mode: S
CamCh: 6[ ]
----------------
clock: 19:39:45
Mode: A
CamCh: 13[N. GATE], 14[ ], 16[ ]
----------------
Message (Short List Format)
• There will be a few seconds difference between the
alarm notification list and the actual time when record-
ing starts.
• Refer to the notes related to Summer Time.
(
☞ Page 116)
Caution