JVC VR-716E - Manual (Page 86)

86
Record Program Using the Program Timer (Start recording on a specific day and time)
Ⅵ Recording Mode
• [CAMERA] 1 - 4
[REC SPEED] : 12.5
[REC QUALITY] : [H]
[AUDIO REC]
: [ON]
• [CAMERA] 5 - 8
[REC SPEED] : 25
[REC QUALITY] : [N]
[AUDIO REC]
: [ON]
• [CAMERA] 9 - 12
[REC SPEED] : 2.5
[REC QUALITY] : [N]
[AUDIO REC]
: [OFF]
• [CAMERA] 13 - 16
[REC SPEED] : 1/2
[REC QUALITY] : [B]
[AUDIO REC]
: [OFF]
Notes
• [END] DAY cannot be set if [DAY] is se-
lected for [START] DAY.
• Only [ON] or [OFF] can be selected under
[EXEC] if [DAY] is selected for [START]
DAY.
1.
Click z z
2.
Set to the Program Timer Standby mode
☞ Page 88 ‘Setting VR-716 to the Program Timer Standby Mode’
Notes
• [DAILY MODE] can be set when [DAY] is
selected at [START] DAY. Select [***] for
days for which recording is not to be ex-
ecuted, followed by clicking [SAVE].
Program List for Weekly Timer
Press [UP] to change and [DEL] to clear
preset values.
Be careful when [DAY] is selected for other
Program Nos. As all record programs with
[DAY] selected will be set at the same time.
• Click [SAVE] to save settings at VR-716.
• Click [RESET] when settings are incor-
rectly entered. This restores the setting
saved at the recorder.
• Upon clicking [SAVE], restoration of the
original preset value will not be possible.
<Example> Execute recording from 9:30 a.m. ~ 10:30 p.m. on every Monday, Wednesday and Friday.
Connecting to a PC – Routine Uses of the Web Browser – (continued)
Program List for Weekly
Timer.
Select the Program No..
Select the day/time for
recording to start and
end. Set [START DAY]
to [DAY].
Select the [REC
SPEED], [REC
QUALITY] and [AUDIO
REC] for each camera
channel.
Select [ON].
Click [SAVE].
Select [***] for setting
other than [MON],
[WED] and [FRI].
Click [UP] to update
setting for the Program
No. selected in 1.
1
2
3
4
5
7
6
• Refer to the notes related to Summer Time.
( ☞ Page 116)
Caution