JVC VR-716E - Manual (Page 87)

87
Record Program Using the Program Timer (Start recording at a specific date)
Ⅵ Recording Mode
• [CAMERA] 1 - 4
[REC SPEED] : 8.3
[REC QUALITY] : [H]
[AUDIO REC]
: [ON]
• [CAMERA] 5 - 8
DO NOT RECORD
• [CAMERA] 9 - 12
[REC SPEED] : 4.2
[REC QUALITY] : [B]
[AUDIO REC]
: [OFF]
• [CAMERA] 13 - 16
DO NOT RECORD
Notes
• A maximum of 16 timer programs can be
set for a specific recording mode in the
Date Timer Setup.
• Click [RESET] to restore the value previ-
ously saved.
• Click [SAVE] to save settings at VR-716.
• Click [RESET] when settings are incor-
rectly entered.
• Upon clicking [SAVE], restoration of the
original preset value will not be possible.
1.
Click z z
2.
Set to the Program Timer Standby mode
☞ Page 88 ‘Setting VR-716 to the Program Timer Standby Mode’
<Example> Execute recording from 8:00 a.m. ~ 11:00 p.m. on 1 October.
• When all the “CAMERA” settings of a par-
ticular “BLOCK” in VR-716’s “REC MODE”
Menu are set to “OFF”, the “FRAME
RATE”, “REC QUALITY” and “AUDIO REC”
settings for that block cannot be altered.
• Refer to the notes related to Summer Time.
( ☞ Page 116)
Caution
Select the time to start/
end record program.
Select the [REC
SPEED], [REC
QUALITY], [AUDIO
REC] and [EXEC] for
each camera channel.
Click [SAVE].
Select the date to
execute record.
Select the Program No.. 1
2
3
4
5
Program List for Date
Timer.