JVC VR-716E - Manual (Page 16)

16
SEARCH MENU
REV
SKIP
FWD
HDD OPERATE
LOCK
VIDEO AUDIO
OUT
EXECUTE
1.
3. 4. 2.3.
MENU
CLOCK SET
ONSCREEN MODE
FDP/BUZZER
REC MODE
CAMERA TITLE
OPERATION/EXT REC
MONITOR DISPLAY
ALARM SENSOR MODE
PROGRAM TIMER
NETWORK
DISK UTILITY/MAINTENANCE
MAIN MENU/OPERATION MENU
RESTART, AFTER TIME ZONE SETTING.
START?
UTC
TIME ZONE SETTING
[CANCEL]:CANCEL [EXEC]:START
[EXEC]:REGISTER
CLOCK SET
D M Y H M
15 07 2003 12 28
* * * * * * * * * * * * * *
* * * * * * * * * * * * * *
* * * * * * * * * * * * * *
* * * * * * * * * * * * * *
<= : RETURN
US/Michigan
US/Mountain
US/Pacific
US/Samoa
UTC
T I M E Z O N E
Menu Screen
Installation and Preparation (continued)
Setting the Date/Time
Onscreen Setting Using the Monitor Screen
Set the date and time on the monitor screen.
• Pay attention when changing dates if the
hard disk contains recorded data.
Playback, Skip Jump or Direct Jump by
Date/Time may not properly function if there
is overlap in the recording dates.
• Date/Time setting is disabled when in the
Recording mode.
• Refer to the notes related to Summer Time.
( ☞ Page 116)
Caution
1.
Press the [MENU] button
• This displays the “MAIN MENU/OP-
ERATION MENU” screen on the moni-
tor.
2.
Select the “CLOCK SET”
item using [
/ ] and
press [ ]
• Move the cursor to select.
3.
Press [ ] to move the cursor to “TIME ZONE”
and select using the jog dial
• Turn the jog dial to select the region that
you reside in.
4.
Press [EXECUTE] to display the confirmation
screen
• It will restart automatically and “TIME ZONE” will be set when pressing
[EXECUTE] again.
• The order of D/M/Y will change in accor-
dance with the “DATE DISPLAY” setting in
the “ONSCREEN MODE” menu.
Note
Ⅵ TIME ZONE Setting
Confirmation screen
REV FWD
EXECUTE