JVC VR-716E - Manual (Page 66)

66
COM
EXT REC
OUT REC
SER
IN
OUT RST
CLK
OUT
WAR
IN COM RST
OUT 16 14 12 10 8 6 4 2
15 13 11 9 7 5 3 1
ALARM
13 16 9 12
5 8 1 4/ 16
EE OUT
9 10 11 12 13 14 15 16
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
S:RISQUE DE CHOC
ELECTRIQ
1.
SEARCH MENU
REV
SKIP
FWD
HDD OPERATE
LOCK
VIDEO AUDIO
OUT EXECUTE
2.
4.5. 3.5.
MENU
REV FWD
REV FWD
1.BLOCK 1
2.REC MODE ALARM
25 IPS
180SEC
10SEC
ON
OFF
OFF
OFF
H
3.FRAME RATE
4.QUALITY
5.DURATION
6.AUDIO REC
7.PRESENSOR REC
8.PRESENSOR REC DURATION
9.EXT INPUT OPERATING MODE
10.MOTION DETECT
11.MOTION DETECT SETTING
ALARM/SENSOR MODE
1.BLOCK 1
2.REC MODE ALARM
25 IPS
180SEC
10SEC
ON
OFF
OFF
OFF
H
3.FRAME RATE
4.QUALITY
5.DURATION
6.AUDIO REC
7.PRESENSOR REC
8.PRESENSOR REC DURATION
9.EXT INPUT OPERATING MODE
10.MOTION DETECT
11.MOTION DETECT SETTING
ALARM/SENSOR MODE
1.BLOCK 1
2.REC MODE ALARM
25 IPS
180SEC
10SEC
ON
OFF
OFF
OFF
H
3.FRAME RATE
4.QUALITY
5.DURATION
6.AUDIO REC
7.PRESENSOR REC
8.PRESENSOR REC DURATION
9.EXT INPUT OPERATING MODE
10.MOTION DETECT
11.MOTION DETECT SETTING
ALARM/SENSOR MODE
1.
Connect the alarm device to the ‘Signal Input/
Output terminal’ on the rear panel of the equip-
ment
• Connect the alarm device to the [ALARM IN 1 ~ ALARM IN 4] and
[ALARM IN 9 ~ ALARM IN 12] terminals.
2.
Press the [MENU] button
• Follow procedures in ‘Changing Menu Settings’ on page 22 to display
the “ALARM/SENSOR MODE” Menu.
3.
Press [ ] to select the
“BLOCK” item
• Move the cursor to select.
4.
Turn the jog dial to select “1”
• Setting can now be performed for
Camera 1 ~ Camera 4.
5.
Press [ ] and turn the jog dial to select “REC
MODE” to set a value
• “ALARM” :
Starts alarm recording only when VR-716
is in the Recording mode.
• “SENSOR”:
Starts sensor recording only when VR-716
is in the Stop mode.
• “ALARM/SENSOR” :
Starts alarm recording when VR-716 is in
the Recording mode and sensor recording
when in the Stop mode.
• Ensure that the “EXT INPUT OPERATING
MODE” ( ☞ page 28) item is set to “ON”. If
this is set to “OFF”, recording via alarm sig-
nals is not possible even when setting is
completed.
• About 1 second or less will be required be-
fore sensor recording starts upon the input
of alarm signals. To resolve this, make use
of the ‘Presensor Recording’ feature.
(
☞ Page 113)
Activation of Recording Via External Alarm/Sensor Signals
Useful Features (continued)
When signals from alarm devices are input via the [ALARM IN] terminal on the rear panel, recording will automatically start in the
mode as specified for the “REC MODE” item in the “ALARM/SENSOR MODE” Menu (
☞ Page 27). Alarm recording will be executed
if alarm signals are received when VR-716 is in the Recording mode. Sensor recording will be executed when in the Stop mode. In
other words, naming varies according to the mode of VR-716.
<Example>
Set the record mode for Cameras 1 - 4 and
Cameras 9 - 12.
Before doing so, ensure that setting for
Cameras 1 - 4 and Cameras 9 - 12 in the
“REC MODE” Menu is completed.
☞ Page 36 ‘Recording in the Normal Mode’
For selecting a record mode.
For selecting the frame rate during recording.
For selecting the picture quality during
recording.
For selecting the duration of recording.
For selecting whether to execute audio
recording during recording.
For selecting the duration of presensor
recording.
☞ Page 113 ‘Presensor Recording’
For selecting whether to activate presensor
recording.
For setting the operation of the record mode.
☞ Page 28 ‘ALARM/SENSOR MODE Menu’
Notes
<Types of Record Modes>