JVC VR-716E - Manual (Page 5)

5
SEQUENCE MULTI REC STOP PLAY STILL
DISPLAY
CANCEL SEARCH MENU
REV
SKIP
FWD
HDD OPERATE
LOCK
VIDEO AUDIO
OUT EXECUTE
TIMER
Built-in hard disk drive with a high
capacity of 160 GB
Simultaneous recording of 400 images /
sec in 16 channels
Recording up to 400 images/second.
Simultaneous Playback mode
Playback, jog/shuttle playback and skip play are
possible during recording.
Monitor with display in quad or 16 split
pictures
16-channel video input can be displayed in quad
or 16 pictures at 25 images per second on the
monitor.
Direct search on the screen
Searches quickly for the date/time and alarm
position to invoke.
Recovery Recording during power out-
age
Upon recovery from a power outage that oc-
curred during recording, VR-716 will resume re-
cording in the mode prior to the failure.
Timer Recording
Daily/Weekly timer recording up to 8 programs.
Thank you for
purchasing this VR-716E
Digital Video Recorder.
In the subsequent sections of this manual, this equipment shall be referred to as VR-716.
Main Features
Alarm/Sensor Recording
Switches automatically to the Alarm Recording
mode as set in the menu when alarm signals
are received during recording.
Supports 16-channel asynchronous
camera inputs
Simultaneous recording/playback of images in
16 asynchronous cameras.
Network-compatible
Recorded images can be viewed on LAN-con-
nected computers. Titles and timer programs can
also be set using computers.
Motion Detect
Automatically detects image motion within the
specified area and starts alarm recording.
Digital Water Mark
Embeds data in images to protect data integrity
against falsification and unauthorized detection
during data replication.
Transmission of alarm e-mails
E-mails can be sent out to any computers dur-
ing alarm (sensor) input.
Ⅵ Turning On the Operation Lock
Press the [LOCK] and [EXECUTE] buttons
simultaneously.
• This locks the operation immediately and keys are disabled.
(However, this does not apply to control via Web brows-
ers.)
• [LOCK] is indicated on the front display.
Ⅵ Turning Off the Operation Lock
Press the [LOCK] and [CANCEL] buttons si-
multaneously.
• This deactivates the operation lock.
For security reasons, it is recommended that you detach
this page and keep it separately.
How to Use the Operation Lock
VR-716 employs a secret operation lock system to prevent its power from being turned off by mistake or tampering with the record
functions.When the operation lock is turned ON, the lock operation can be selected as either “ALL” or “STOP REC” from the menu.
☞ Pg 25 ‘OPERATION LOCK’
[CANCEL] [LOCK]
Front Display [EXECUTE]
Getting Started