Dvd initial setup – JVC LET0239-001A User Manual

Page 20

Advertising
background image

20

INITIAL SETTINGS (cont.)

DVD Initial Setup

Before using the built-in DVD player, activating DVD
Initial Setup allows you to set up the most fundamental
functions easily.
• You can set the TV monitor type and digital output

signal format.

1

Turn on the power.

On the remote control

Press .

On the unit

Press

STANDBY/ON

.

• The lamp corresponding to the previously selected

deck (either DVD or HDD) lights on the unit.

2

Select the DVD player.

On the remote control

1

Set the

DVD/TV/HDD

selector set to the left (

DVD

).

2

Press

ENTER

.

On the unit

Press

DVD/HDD

so that the DVD lamp lights.

• The opening screen appears on the TV.

3

Show the DVD PLAYER SET UP screen.

On the remote control

Press and hold

SET UP

for about 2 seconds.

• The MONITO TYPE selection screen appears.

4

Select the monitor type of your TV.

Press

5

or

to move to the type of your TV, then

press

ENTER

.

• For a wide-screen TV, select either “16:9 NORMAL” or

“16:9 AUTO.” (For details, see page 77.)

• For a conventional (4:3) TV, select either “4:3 LB” or

“4:3 PS.” (For details, see page 77.)

• The DIGITAL AUDIO OUTPUT selection screen

appears.

5

Select the type of the digital signal to be
emitted through the DIGITAL OUT connectors
on the rear.

Press

5

or

to move to the type you want, then press

ENTER

.

• When connecting to a recording device such as an MD

recorder, and a DAT deck, select “PCM ONLY.”

• When connecting to a Dolby Digital decoder, select

“DOLBY DIGITAL/PCM.”

• When connecting to a DTS, MPEG Multichannel, and

DOLBY Digital decoder, select “STREAM/PCM.”

• If you do not connect the unit to such a device, you do

not have to set this item.

To bring up the DVD PLAYER SET UP screen later

Press

SET UP

.

• This allows you to perform more detailed settings (see

pages 75 to 81).

• Turn on the TV and select an appropriate input (AV)

mode.

• If the unit is turned on with the HDD deck selected,

it takes about 20 seconds until the broadcast picture
appears on the TV. During this period, no
operations are permitted.

1

2

4 6

4

6

2

1

3

MONITOR TYPE options

MONITOR TYPE

4:3 L.B.

PICTURE SOURCE

AUTO

SCREEN SAVER

ON

MP3/JPEG

MP3

DVD PLAYER SET UP

16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS

DIGITAL AUDIO OUTPUT

DOLBY DIGITAL/PCM

ANALOG DOWN MIX

DOLBY PROLOGIC

D RANGE CONTROL

ON

OUTPUT LEVEL

DVD PLAYER SET UP

PCM ONLY

DOLBY DIGITAL/PCM

STREAM/PCM

DIGITAL AUDIO OUTPUT options

Advertising
This manual is related to the following products: