JVC LET0239-001A - Manual (Page 26)

26
HDD RECORDING/PLAYBACK (cont.)
Special effect playback
While playing back a recorded programme, you can use
the following special effect playback.
Searching for a particular scene—Variable Speed
Search
You can change search speed.
• You cannot hear playback sounds during search except
1.5 times speed search.
On the remote control
While playing, press
¡ (SLOW +) or 1 (SLOW –).
On the unit
While playing, press
¢ or 4 .
• Each time you press the button, playback speed
changes as follows:
To resume normal playback, press 3 ( SELECT ).
Going back to a previous scene quickly and play it
back—One Touch Replay
While playing, press on the remote control.
The HDD goes back to a scene of about 7 second before,
and starts replay from it.
• Each time you press the button, the HDD goes back to
a previous scene of about 7 seconds before. For
example, if you press the button three times, the HDD
will go back to the scene of about 21 seconds before.
Skipping forward quickly—Quick Skip
While playing, press on the remote control.
The HDD skips forward (about 30 seconds at a time) and
resumes playback.
This will be convenient when you want to skip a
commercial in a recording.
• Each time you press the button, the HDD skips the
recorded portion of about 30 seconds that follows. For
example, if you press the button three times, the HDD
will skip the following portion of about 1 minute and
30 seconds.
• When using the buttons on the unit, make sure that
the HDD lamp on the unit is lit. If not, press DVD/
HDD so that the HDD lamp lights.
• When using the remote control, slide the DVD/TV/
HDD selector to the right ( HDD ), then press ENTER .
4 / ¢
2 / 3
DISPLAY
SELECT
SLOW – SLOW +
+ x1.5 + x3 + x5 + x15 + x60
– x1 – x3 – x5 – x15 – x60
:
:
or
or