Modifying timer programmings – JVC LET0239-001A User Manual
Page 45
45
Modifying timer programmings
You can confirm, erase, or modify the preset timer
programmings easily.
1
Show the PROGRAMME LIST screen.
2
Select a date for which the timer
programming you want is listed.
3
Select the timer programming you want to
confirm, erase, or modify.
4
Confirm, erase, or change the timer
programming.
To cancel the programming,
press
2
to move to
“CANCEL,” then press
ENTER
.
\
Press
HDD PROGRAM
to finish.
To confirm or change the contents of the programming
1
Press
ENTER
after making sure that is pointing at
“MODIFY.”
• The calendar appears again.
2
Press
ENTER
again after making sure that the selected
date is correct.
3
Confirm the content, or modify it by referring steps
4
to
p
of “Express Timer programming” on pages 42
and 43.
• Make sure that the clock built in this unit is set
properly.
• Turn on the TV and select an appropriate input (AV)
mode.
• When using the buttons on the unit, make sure that
the HDD lamp on the unit is lit. If not, press
DVD/
HDD
so that the HDD lamp lights.
• When using the remote control, slide the
DVD/TV/
HDD
selector to the right (
HDD
), then press
ENTER
.
HDD PROGRAMME
ENTER
ENTER
HDD PROGRAMME
1
Press
HDD
PROGRAMME
.
2
Press
3
/
2
/
∞
/
5
to
move
to
“PROGRAMME LIST,”
then press
ENTER
.
Press
3
/
2
/
∞
/
5
to move
to the desired date, then
press
ENTER
.
Press
∞
or
5
to move to
select one of the timer
programmings listed for the
date, then press
ENTER
.