Selecting programmes on the navigation screen – JVC LET0239-001A User Manual
Page 30
30
HDD RECORDING/PLAYBACK (cont.)
Selecting programmes on the
NAVIGATION screen
This HDD can store up to 100 recordings.
You can show the beginnings of these recorded
programmes on the HDD Navigation screen, and select
one to play or select some to play in your intended order.
To go back to the previous screen while operating HDD
Navigation,
press
RETURN
.
Playing back a programme or a play list
All recorded programmes (except the programmes being
recorded temporarily) are automatically listed on the REC
LIST. On the other hand, you need to make your own
play lists yourself.
• On the PLAY LIST, you can register your own play lists.
For details about how to make a play list, see page 37.
1
Show the NAVIGATION screen.
2
Enter the REC LIST or PLAY LIST screen.
3
Select a programme to play.
4
Start playback.
Press
3
or
2
to move to one of the playback modes
(see the table below), then press
ENTER
.
NOTE
You cannot select “RESUME” for newly recorded programme
(with
icon).
To stop playback
Press
7
(CLEAR)
.
• When you select Repeat Play (“REPEAT”), pressing
3
(SELECT)
cancels the repeat, and resumes normal
playback.
• When using the buttons on the unit, make sure that
the HDD lamp on the unit is lit. If not, press
DVD/
HDD
so that the HDD lamp lights.
• When using the remote control, slide the
DVD/TV/
HDD
selector to the right (
HDD
), then press
ENTER
.
• HDD Navigation does not work during Automatic
Satellite Recording (see page 46).
1
2
–
4
2
–
4
1
Press
HDD NAVIGATION
.
Press
3
or
2
to move to
“REC LIST” or “PLAY LIST,”
then press
ENTER
.
• The REC LIST or PLAY LIST
screen appears.
Press
3
/
2
/
∞
/
5
to move
to a thumbnail you want,
then press
ENTER
.
• The playback selection
screen appears.
BEGINNING
Select to start playback from the beginning.
RESUME
Select to start playback where you have
stopped last.
REPEAT
Select to repeat the same programme.
Repetition continues until you stop it.
PRESS [HDD NAVIGATION]
TO EXIT
SELECT WITH [
]
THEN PRESS [ENTER]
HDD
NAVIGATION
EXIT
SELECT
ENTER
NAVIGATION REC LIST
Ex. When selecting REC
LIST