JVC LET0239-001A - Manual (Page 27)

27
Skipping forward or backward at certain time
intervals—Jump Search
You can locate a scene ahead or behind the current one
by jumping to a selected time interval (see page 67).
• This feature is also available during recording.
While playing (or recording), press ¢ (cursor 3 ) or
4 (or cursor 2 ).
• Each time you press the button, you can move forward
or backward to a selected time (15 minutes, 30
minutes, or 1 hour).
• When you cannot move any farther (beginning or end
of programme is reached), the notice message appears
on the TV. In such a case, press
4 or ¢ to cancel
the last movements.
Example 1:
Jump Search during playback: When “JUMP TIME” is set to “30
MIN”:
•You can move back (or forward) to the scenes of 0 minute, 30
minute, 60 minutes, 90 minutes, 120 minutes (elapsed playing
time), and so on....
•In the above example, you can go back to a scene of 30
minutes and of 0 minute (elapsed playing time).
Example 2:
Jump Search during Live Memory Playback: When “JUMP
TIME” is set to “15 MIN”:
•You can move to the scenes of 0:00, 0:15, 0:30, 0:45 of the
broadcasting hour.
•In the above example, you can move to the scenes of 9:00,
9:15, 9:30, 9:45, 10:00, and 10:15.
Freezing the picture and advance it frame by frame
—Still Picture/Frame-by-Frame Playback
You can show the still picture, and advance or reverse it
frame by frame.
• You cannot hear playback sounds during Still Picture
and Frame-by-Frame Playback.
1 Press 8 to freeze the picture on the TV.
2 Press ¡ (SLOW +) or 1 (SLOW –) repeatedly to
advance or reverse the still picture.
To resume normal playback, press 3 ( SELECT ).
Playing in slow motion—Slow Motion
You can select the slow motion speed.
• You cannot hear playback sounds during Slow Motion.
1 Press 8 to freeze the picture on the TV.
2 Press and hold SLOW + ( ¡ ) or SLOW – ( 1 ) for
about 2 seconds to start slow motion playback.
• Each time you press the button, playback speed
changes as follows:
To resume normal playback, press 3 ( SELECT ).
Repeating the same programme—Repeat Play
You can repeat the same programme repeatedly using
HDD Navigation.
• For detailed operations, see “Playing with HDD
Navigation” on pages 29 to 33.
0 min.
40 min.
60 min. 75 min. 30 min.
Elapsed time (shaded) and remaining time (white)
Beginning of
programme Current scene End of
programme
9:00
9:15 9:30
9:40
9:45 10:00
10:15
Elapsed time (shaded) and traced time from the current
time
Beginning of
programme
Current replay
scene Current time
+ x1/18 + x1/6 + x1/2 :
– x1/18 – x1/6 – x1/2 :