JVC LET0239-001A - Manual (Page 43)

43
7
Set the Weekly/Daily Timer.
1 Press ∞ or 5 to move to “WEEKLY/DAILY,” then
press ENTER .
2 Press ∞ or 5 to select the desire mode, then press
ENTER .
NOTE
For details on each mode, see page 44.
8
Set the PDC mode.
1 Press ∞ or 5 to move to “VPS/PDC,” then press
ENTER .
2 Press ∞ or 5 to select “ON” or “OFF.”
NOTES
•You can also use VPS/PDC button to turn the PDC setting “ON
and “OFF.” PDC works for a timer recording only when the
unit is turned off.
•You cannot set “PDC” to “ON” for a satellite broadcast
programme. If you want to use PDC for a satellite programme
recording, use Automatic Satellite Recording (see page 46).
•VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this unit.
9
Select and set other options as required.
To modify a title of the TV programme:
To modify the category of the TV programme:
p
Finish the timer programming.
1 Press ∞ to move to “OK,” then press ENTER .
• The confirmation screen appears.
2 Press ENTER again after making sure that is
pointing at “EXIT.”
• The recording timer is automatically activated.
To continue timer programming for other programmes,
press 2 to move the arrow to “CONTINUE,” then press
ENTER.
NOTES
•If “...PROGRAMME OVERLAPPED...” appears on the TV
screen, erase the unnecessary programme by referring to page
45.
•For a satellite programme, leave the satellite receiver turned
on.
When you confirm, cancel, or change programme, see
page 45.
To stop while recording in progress
1. Press
7 (CLEAR).
• The confirmation screen appears.
2. Press 2 to move to “CANCEL,” then press ENTER .
• To continue recording, simply press ENTER (with
pointing at “CONTINUE”).
• You cannot stop the recording if a timer recording
starts while the unit is turned off.
1 Press ∞ ∞ ∞ ∞ or 5 5 5 5 to move
to “TITLE,” then press
ENTER.
2 Enter the title by referring
to “To change (or newly
assign) the title” on page
36.
1 Press ∞ ∞ ∞ ∞ or 5 5 5 5 to move
to “CATEGORY,” then
press
ENTER .
2 Press 3 / 2 / ∞ / 5 to
move to a new
category, then press
ENTER.